The setup file for WinFrac 6 (32 meters and 16 sensor channels) can be downloaded free of charge from our website. It does not contain WF6.exe, but does have all the drivers and setup files you'll need to install WinFrac 6. WF6 Setup file

The WinFrac 6.132R executable file, created on the 19th of May, 2010, can be downloaded here. This is the .exe file ONLY: you will need to have a functioning install of WinFrac 6.x already on your system for this to run. You'll need to copy this file to the WF6 directory.

The Winfrac 6.130 executable file, created on the 9th of July, 2009, can be downloaded here. This is the .exe file ONLY: you will need to have a functioning install of WinFrac 6.x already on your system for this to run. You'll need to copy this file to the WF6 directory.

Important Note: If you are logging and WinFrac is _not_ creating a .dat file, instead it is _only_ creating a .csv file, and you want it to create a .dat file, then go to the WF6\Config directory, open the flowback.ini file, and change "Flowback=true" to "Flowback=False". The .csv file should contain all the same data that the .dat file contained, just saved in a slightly different format, so if you are passing it on to corporate or to the company man it should be ok. But if you are planning to use post plot then you'll need a .dat file. When flowback is set to false a .dat file & a .csv are created so that if corporate or the company man wants a .csv file full of data they can be given one instead of a .dat file. The .csv created will contain all 32 meters and all their data, not just the up to 16 meters you can log with a .dat file.

The setup file for WinFrac 7.21 (96 meters and 32 sensor channels) can be downloaded here as well. It has everything you'll need including the winfrac executable. WF7 Setup file

If you are using the setup to upgrade your existing verison of WinFrac7, before running it you'll need to do a few things:

1. Save your current profile
2. Make a copy of your current WF7 directory
3. Through the control panel you'll need to uninstall WinFrac versions 6 and 7 if they are there, or WFTemp if it is there
4. Then run the WFsetup.exe which will install a fresh version of WinFrac7 onto your computer
5. Load the profile you saved in step one

The latest version of the English.dct can be downloaded here. It was created on April 1, 2010. If your English.dct is older, please use this newer one. It works for both WinFrac6 and WinFrac7.

Post Plot Files

PostPlot

Manuals

We have two manuals avaiable for download:
the Winfrac manual, and the Postplot manual.

Hardlock Driver

Hardlock Driver Installation 32/64bit (Windows 95/98/ME/NT4/2000/XP/Vista/2003, Win 2003 Server x64, WinXP x64).

ATI FireMV 2400 Video Card Drivers

If you are using an ATI FireMV 2400 PCI video card you may need the following drivers:
Catalyst Software Suite for ATI FireMV 2400 PCI version 8.253.200.1

If you are using an ATI FireMV 2400 PCIE video card you may need the following drivers:
Catalyst Software Suite for ATI FireMV 2400 PCIE version 8.593.100.8

 
After downloading the files, you will need to use WinZip to uncompress any that end in .zip.