|
WinFrac© Monitoring System Software For
Oil Field Service Company Service Supervisors
The WinFrac program acquires data from sensor sources and inputs from other sources in real time, converts these data to engineering units, manipulates these data based on recognized oil field relationships, and displays the results in meter form on multiple screens. Selected data are output in various ways to provide well treatment data to other computer based analysis functions.
Some of the more popular features are:
Customer logo on start screen
Global totalizer RUN, HOLD, RESET, RESET LOCK, and Conditional RESET determined by Job Schedule setup
On screen real time strip chart of up to 8 traces of meter display values with moving chart grid
Graph of a scheduled process variable and the actual real time value of that process variable vs a selected totalizer variable
Selection screen for configuration of control data output
Selection screen for serial data output for transmitting to other programs in real time
Selection screen selecting data for logging to disk in real time and user input of datafile name
Selection screen for storing and recall of system configurations for different customers, job types and pump schedules
After treatment printout of treatment records and charts using the included PostPlot program
? 8/16/32 analog and/or rate sensors can be monitored via Bettico Interfaces
Multiple additional signals can be input to the system via the serial ports from other analysis programs, down hole tools, equipment controllers
Feeds serial data to analysis software such as FRACPRO, GuyDon SMARTS, MEYERS, STIMPLAN
Optional “Real Time” Upload of data via Satellite Internet connection
System presents job treatment data on up to 4 user selectable screens of 8 meters for a total of 32 meters (WinFrac version 6) or 12 meters per screen on up to 8 screens for a total of 96 meters (WinFrac version 7) displaying:
- pressures
- densities
- propant concentrations
- propant concentrations calculated from delta rates, clean and dirty rate, clean rate and slurry PPA,
- propant rates
- propant rates calculated from related variables: [PPA, density of propant, slurry rate], [clean and dirty rate, density of propant]
- rates
- totals
- summations of rates and totals
- additive loading ratio
- fluid conditions
- pH
- viscosity
- temperature
- User may enter formulas to display of the result of calculations use the displayed values of other meters, and constants, and summation, difference, product, quotient, and power mathematical operators
- user adjustable variables (Factors)
Any screen of 8 (12) meters can be displayed on any monitor at the operators discretion
Each meter can be configured by the operator to access information from one of 16 (32) sensor channels or from another meter in the system or from a field in a serial record fed to the system from another computer or from an internal calculated variable
Any meter can be slaved to another meter, either directly or proportionally
Display smoothing using adjustable averaging, adjustable fast response trip point, and secondary averaging when in fast response mode
Adjustment of span and zero of display reading at any time for on-the-fly re-calibration, quick zero
User can change any meter's name, data type, units of measure, data source, display resolution, smoothing and calibration at any time
Totalizer, concentration, and density meters have start / stop buttons to allow the operator to select whether the meter should respond to data
Totalizer meters have hold / lock, reset and adjust capability to correct readings at any time
Winfrac Manual
We have two winfrac related manuals avaiable for download:
the Winfrac manual, and the Postplot manual.
After downloading the manuals, use WinZip to uncompress the files.
|
|
